Welcome: BMC INDUSTRY COMPANY LIMITED
Language: Chinese   English

PP/HDPE Uniaxial geogrid

  • PP Uniaxial Geogrid 35-200kN
  • PP Uniaxial Geogrid 35-200kN
  • PP Uniaxial Geogrid 35-200kN
  • PP Uniaxial Geogrid 35-200kN
  • PP Uniaxial Geogrid 35-200kN
  • PP Uniaxial Geogrid 35-200kN
PP Uniaxial Geogrid 35-200kNPP Uniaxial Geogrid 35-200kNPP Uniaxial Geogrid 35-200kNPP Uniaxial Geogrid 35-200kNPP Uniaxial Geogrid 35-200kNPP Uniaxial Geogrid 35-200kN

PP Uniaxial Geogrid 35-200kN

  • Material: Polypropylene (PP) / Polyethylene (PE)
  • Tensile strength: 35-200 kN/m
  • Use: Roadbed and retaining wall reinforcement
  • MOQ: 5000 m2
  • Product description: Good Quality PP Uniaxial Geogrid Price,Leading Uniaxial Geogrid Manufacturer&Exporter,35-200kN/m PP and PE Geogrid for Roadbed and Wall Reinforcement.
  • INQUIRY   EMAIL

Product description

PP and PE uniaxial geogrid is punched from a polymer sheet and stretched in the longitudinal direction only, so the grid carries high tensile load along the roll.

Characteristics

  1. Tensile strength from 35 kN/m to 200 kN/m for light to heavy reinforcement duties.
  2. Uniaxial orientation gives high modulus and low creep under permanent load.
  3. Ribs and transverse bars anchor into granular fill and stabilise the reinforced mass.
  4. PP/PE material resists corrosion and weathering in buried service.
  5. Flexible rolls are quick to cut, position and overlap on site.

Application

  • Roadbed and pavement reinforcement
  • Retaining wall and steep slope reinforcement
  • Embankment and subgrade stabilisation

Specification

Material PP / PE
Tensile strength 35-200 kN/m
Application Roadbed and retaining wall reinforcement
MOQ 5000 m2
Inquiry: